Several Pieces of Refuse Equipment for Sale

I have the following pieces of equipment for sale or possible trade. Please email or call with questions ssperry5@insightbb.com (309)221-8568.

Thanks,

Steve Sperry

To view a bigger picture click on the image or go to

 http://www.angelfire.com/rnb/4u1/images/IMAG1.JPG or http://www.angelfire.com/rnb/4u1/images/IMAG0002.JPG

 More pictures of this truck at http://www.angelfire.com/rnb/4u1/pictures/

1985 International with a 10 speed Roadranger transmission, newer clutch plate (it has less than 10,000 miles on it), DT466 engine, 250HP. There are 246,899 miles on the odometer. 1994 Galbreath 60000# roll off hoist purchased new,It is used, but is in good condition, tires are recaps two or three may need to be replaced with better tread.  The hoist and truck are in good working order although there is a minor seal leak on the hoist pump, no wear on rollers, spare PTO unit. VIN: 1HTLKTVR9FHA24829 the model is F1954 the wheelbase is 236” and the manufacture date is 11-28-84-2

Click on the image for a larger picture.

Dash   Driver seat    Drivers door        Floor board      

Drivers kick panel                      

 1988 Leach Alpha 20YD Packer in pretty good condition w/overhead hoist, new hopper plate; mounted on 1988 Ford F800-5speed, LN8000 Diesel, Hydraulic brakes;. (will separate)

http://sbjaj1.tripod.com/alpha20ydpackerls.jpg More views at   http://sbjaj1.tripod.com/alpha20ydpackerrs.jpg  and  http://sbjaj1.tripod.com/alpha20ydpackerrear.jpg

I also have a older, but in good shape 17YD Leach packer.

http://sbjaj1.tripod.com/leach17ydls.JPG More views at http://sbjaj1.tripod.com/leach17ydrs.JPG  and http://sbjaj1.tripod.com/leach17ydrear.JPG

Also a 25 yd Leach packer w/overhead hoist mounted on a 79 International Cargostar with a CAT 3208 engine, Automatic Allison tranny, will separate.

http://sbjaj1.tripod.com/leach25yd2Rrs.JPG

bigger picture at  http://www.angelfire.com/rnb/4u1/images/IMAG0001.JPG

model 72 HD 72” paper baler with two 52" x 6" x3.5" cylinders 
 I have some control valves and maybe a pump that I believe will work with it, but no motor.

 Manufactured by Preferred Systems Inc. 501 East County Line Road, Springdale, AR, 72764
479-751-3013

I also have some tire repair equipment:

Bishman bead breaker

 2 Brannick tire spreaders, one is a heavy duty for truck tires and large implement tires and one is just for truck/bus tires

Tire equipment can also be seen at http://www.angelfire.com/rnb/4u1/pictures/